---------------------- multipart/alternative attachment Drill a hole in 1/4" brass rod (or whatever fits your soldering iron) Insert the reamer Secure with a pin driven into the inside of the reamer. I presume that you are trying to make a heated reamer from an umbrella stave. Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net http://www.stanwoodpiano.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b6/e7/80/27/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC