Tool making advice

[Lance Lafargue]

Joe,
If I solder it in, won't reheating it in the key easing tool (even if not as
hot) resoften or at least weaken the solder over time?  Thanks for the info.
Lance Lafargue, RPT
Mandeville, LA
New Orleans Chapter, PTG
lancelafargue@bellsouth.net

-----Original Message-----
From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf
Of Joe & Penny Goss
Sent: Thursday, June 07, 2001 10:25 AM
To: pianotech@ptg.org
Subject: Re: Tool making advice


Lance,
Silver solder.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message -----
From: "Lance Lafargue" <lancelafargue@bellsouth.net>
To: "pianotech listserv (E-mail)" <pianotech@ptg.org>
Sent: Thursday, June 07, 2001 8:21 AM
Subject: Tool making advice


> I need to attach a metal piece into brass stock.  This tool will be heated
> with a key easing tool.  How can I attach it securely and have it hold
even
> when heated? It will be stressed and needs to be a strong bond.  Thanks in
> advance.
>
> Lance Lafargue, RPT
> Mandeville, LA
> New Orleans Chapter, PTG
> lancelafargue@bellsouth.net
>