Mike I've replaced the springs with great success. it is a fairly simple job. The springs from the supply houses need to be modified and weakened but the results are well worth the effort. I didn't have a drill bit small enough to ream the holes but an appropriate piece of piano wire did the job. Paul Chick ----- Original Message ----- From: Mike Coplin <coplinpiano@bright.net> To: <pianotech@ptg.org> Sent: Saturday, July 28, 2001 10:58 AM Subject: hammer spring rails > Anyone, > Where can I get replacement hammer spring rails for those Pratt-Reed > vertical compact actions? > You know, the ones that self destruct because of the felt contacting the > coils causing corrosion. > > Thanks, > > Mike Coplin RPT > Indiana Chapter >
This PTG archive page provided courtesy of Moy Piano Service, LLC