how to find the type of piano

[Tom Driscoll]

----- Original Message -----
From: Tom Driscoll <tomtuner@mediaone.net>
To: <pianotech@ptg.org>
Sent: Monday, July 23, 2001 12:16 AM
Subject: Re: how to find the type of piano


>
> From: Robert Goodale <rrg@nevada.edu>
> Subject: Re: how to find the type of piano
>
>
> > There could possibly be a name cast into the BOTTOM of the plate.  Pull
> the
> > bottom kick board off and look around the parameter of the plate.
> Sometimes the
> > casting companies put there own identification on them.  It may only be
a
> small
> > indentation on the casting where an I.D. tag was attached to the
original
> > molding.
> >
> > Rob Goodale, RPT
> > Las Vegas, NV
>
>         Brian,
>            Rob's suggestion is a good one. Although if you see the
> names  --Wickham or Kelly those are plate manufacturers not piano names.
>     Tom Driscoll
>