From: Robert Goodale <rrg@nevada.edu> Subject: Re: how to find the type of piano > There could possibly be a name cast into the BOTTOM of the plate. Pull the > bottom kick board off and look around the parameter of the plate. Sometimes the > casting companies put there own identification on them. It may only be a small > indentation on the casting where an I.D. tag was attached to the original > molding. > > Rob Goodale, RPT > Las Vegas, NV Brian, Rob's suggestion is a good one. Although if you see the ames --Wickham or Kelly those are plate manufacturers not piano names. Tom Driscoll
This PTG archive page provided courtesy of Moy Piano Service, LLC