Susan You are right about the viscosity. Experiment a little more. I like the brass cauls from Pianotek. They can be heated after installation to size and iron the felt as well as set the hide glue to a uniform "backing" the is stiffer than white glue. ----- Original Message ----- From: "Susan Kline" <sckline@attbi.com> To: <pianotech@ptg.org> Sent: Tuesday, December 04, 2001 6:45 PM Subject: Re: key bushing glue experiment > I've had people tell me that I should use hot hide glue for keybushings > > with the white glue, which I usually use, instead of the hot hide. This > might be because I had no experience with the hot hide glue, so I may > not have used the right viscosity. > > Susan >
This PTG archive page provided courtesy of Moy Piano Service, LLC