I would think that such a necessary item would be picked up by one of the other suppliers, like Pianotek, and when they know they supply the only one, it'll be $120. Maybe reminding the other suppliers might get some movement? Lance Lafargue, RPT Mandeville, LA New Orleans Chapter, PTG lancelafargue@bellsouth.net -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Bill Ballard Sent: Wednesday, April 11, 2001 6:28 AM To: pianotech@ptg.org Subject: Re: Torque wrench >I've been looking for a small inch pound torque wrench for measuring pin >tension. APSCO used to carry one but discontinued it. Does anyone know of a >good source for one. You're right, APSCo no longer carries the 1/4" tuning pin socket which will fit onto the 1/4" drive torque wrench available anywhere. You could try having your local machinist weld a tuning tip onto an appropriately sized 1/4" drive 12 point socket. I'll now start watching out for my own 1/4" drive tp socket, knowing that it's no longer a catalog item. Bill Ballard RPT NH Chapter, P.T.G. 098783 EA Hamburg Tuning Pins 4/0 2-1/2.......$72.00 T5591600 1PC Key Flame Guide ...........My two favorite catalog items (Steinway 4/96, and Yamaha respectively) +++++++++++++++++++++
This PTG archive page provided courtesy of Moy Piano Service, LLC