Hi, Bridle problem SOLVED! While i did not have excessive hammer rail travel, I reached a solution. I bent the bridal wires uniformly, and added a very small piece of felt to the reduce rail travel slighlty from its1/2" norm. Works well now and no winking. Thanks for all the help. Terry n Tue, 11 January 2000, Gatesfam6@AOL.COM wrote: > > The answer to your problem may lie in that the hammers are traveling to far. > When you depress the left pedal. The hammers shouldn't travel more then half > the blow distance. If there isn't a stop on your hammer rest rail to block > the rail from traveling to far, you will more then likely 'wink' no matter > how far forward you adjust your bridle strap wire. > > Paul Gates RPT > Farmington Ut. ______________________________________________________________ Get free Internet service and email at http://www.worldspy.com
This PTG archive page provided courtesy of Moy Piano Service, LLC