Hi Kristinn, The demolition that I saw in the 60s used 4 pound sledge hammers and a 6 inch steel ring that the entire piano had to be passed through. Joe Goss ----- Original Message ----- From: Kristinn Leifsson <istuner@islandia.is> To: <pianotech@ptg.org> Sent: Sunday, February 27, 2000 2:40 AM Subject: Amusing tortures for "pianos" > Dear List, > > I believe there was once a competition between some university students and > a group of piano techs which involved getting a moderately sized piano > through a hole approximately 50 or 60cm to all sides(yeah, just convert it > you Yanks out there). > > > This probably entailed a chainsaw, a hacksaw, an impact drill etc. > > > I think the students won because the techs were a little bit too methodical > whereas the students just totally destroyed it. > > > Kristinn Leifsson > Reykjavík, Iceland > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC