OK, I'll give this a try. My understanding is that studio keys being smaller in height (less wood) don't move as much as thicker keys. I personnally think that it is only the thickness of the keys that make for all that seasonnal changes. And then I might also be wrong, but this is the only logical cause that I could think of. Marcel Marcel Carey, accordeur technicien (819) 564-0447 mcpiano@globetrotter.net ----- Message d'origine ----- De : <Wimblees@AOL.COM> À : <pianotech@ptg.org> Envoyé : 2000-décembre-27 09:00 Objet : Re: When to do it - do it now > In a message dated 12/26/00 11:50:50 AM Central Standard Time, > RNossaman@KSCABLE.com writes: > > << If the keybed isn't bowing, did anyone measure it's thickness at the back > edge to see if it's swelling? How about the overall height from key bottom > to capstan top on one key to see if the measurement changed during the time > between adjustments? No? Did anyone look at and measure anything at all > other than dealing with the symptom of lost motion changing? Heck, I've > cleared up more than a couple of really embarrassing mysteries for myself > when I finally quit pondering helplessly and actually went looking for > causes. It always makes me wonder what other painfully obvious things I'm > baffled by on a daily basis. > > Hello, hello? > > Ron N >> > > > OK, smarty pants, :) Even if I did do all the measuring, (which I didn't), > what if I did find movement in the keybed. Why is the keybed moving so much > as to cause lost motion? ( I had to turn each capstan about 1/2 a turn.) Was > it the moisture in the back rail cloth? Did the back rail flatten out? I > don't seem to have this problem with other pianos. Why is it happening on > Yamaha studios? I thought Yamaha's were supposed to be better than the > average piano, which does not have this problem? > > Wim >
This PTG archive page provided courtesy of Moy Piano Service, LLC