MX100A pedal adjustment

John Lillico, RPT staytuned@idirect.com
Wed, 30 Aug 2000 22:46:56 -0400


I have no training in these Disclaviers but noticed the sustain pedal didn't start lifting dampers (manually) until the pedal was about 80% down. I also noticed a screw through the bottom door spring which suggested to me "keep out". Now they complain that the sustain doesn't work too well.

Can I go inside and adjust this as on a regular upright without getting involved with the modern elements?

I'm leaving for the job at 8 a.m. (EDT) so any west coast help would be much appreciated.

John Lillico, RPT
Oakville, Ontario




This PTG archive page provided courtesy of Moy Piano Service, LLC