drop actions

[Wimblees@AOL.COM]

In a message dated 98-12-30 07:01:08 EST, you write:

<< It has probably been discussed before, but soon I will have to take out two
 `drop action' actions out of their cases. Any suggestions for doing this
 efficiently? >>


The easiest way to get a drop action out of piano is to remove the keys first,
then the action. It will help if you can tie the stickers to the hammer rail.
You can use a bungy cord, or a stick the length of the action. To get the
action back in, lay newspaper over the balance rail pins, so that the stickers
do not get stuck in between the pins.  Good Luck

Willem Blees RPT
St. Louis