At 08:09 PM 12/3/98 -0500, you wrote: >Terry, >Prior to removing the bridge from the piano measure the down bearing. >When making the new body, adjust its height as necessary for any >correction needed. Once reinstalled mark for the pins with a thread drawn >fron the hitchpin to the pressure bar pin (hope it has them :-). > >It is rather easy, Thanks Jon. I was wondering how to line up the bridge pins. I had considered making as mylar template, but most of the bridge pins and bridge pin holes no longer exist. Thanks Terry Beckingham
This PTG archive page provided courtesy of Moy Piano Service, LLC