Scott Rogers wrote: > I have a Baldwin L to restring, and I can't remember what steps are > necessary to setting proper down bearing with the accu-just hitch pins. > I know Baldwin used to loan out a downbearing gauge for setting DB on > each unison. Does anyone know if they still offer this, and if so > contact #'s? > Thanks for your help. > Scott Rogers, RPT Bearing1.txt is from a Baldwin tech sheet, direct from the source. Bearing4.txt is a conversion chart to relate the instructions in bearing1 to degrees, so you can use a Lowell gage, Wixey, or whatever, instead of Baldwin's gage. Ron N -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: bearing4.txt URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090423/1540e76f/attachment-0002.txt> -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: bearing1.txt URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090423/1540e76f/attachment-0003.txt>
This PTG archive page provided courtesy of Moy Piano Service, LLC