[CAUT] action stack protocol

[Jon Page]

>Thanks for the tip!. I have struggled with that problem (getting the 
>buttons all to be square), and never found a really satisfactory 
>solution. This looks like the one.


Then you'll love this one:

Hammer lead swege. The wooden button is to place on one prong
to act as an anvil when there is not a bore-through.

When the pliers are actually used to remove hammer heads, I like to place them
on a hard edge and tap the bolt head with a hammer to ease the 'break'.

Back to the Let Off application, when installing buttons when the wippens are
present, I have a bolt with the tread length cut to the width of the arm.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080619/22fd0876/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: swege.jpg
Type: application/octet-stream
Size: 45714 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20080619/22fd0876/attachment-0001.obj