Split the old dowels off as Ed mentioned. If the threaded rod are in good shape and the new dowels fit, go with that. If you need to change the rods too, grind two edges parallel with a Dremel tool and use a spade screw tool to remove (mounted in a drill). jpg attached. -- Regards, Jon Page -------------- next part -------------- A non-text attachment was scrubbed... Name: broken_rep_screw.jpg Type: application/octet-stream Size: 64746 bytes Desc: not available Url : https://www.moypiano.com/ptg/caut.php/attachments/20080618/20c1fbbc/attachment-0001.obj
This PTG archive page provided courtesy of Moy Piano Service, LLC