Hey, David, I¹ve been gone this week, so I¹m just now replying. I went through this a while back. Those are 12x28 machine screws. I found a 12x28 tap at the hardware store (that¹s how I confirmed the size), but nobody makes 12x28 screws any more. I bought a 1/4x28 tap and a #3 drill and replaced the originals with a hex head cap screw. Quick job, works great. Regards, Ken Z. On 7/24/08 2:01 PM, "David Skolnik" <davidskolnik at optonline.net> wrote: > Tom & friends, > I have devoted an unconscionable number of hours to this pursuit, to no avail. > The screw dimensions are .2125" (5.4mm) > iameter and 28+ tpi. There must be someone who knows the history of this > screw, why these dimensions were employed and when it might have changed. At > this point it seems a matter useless curiosity, nothing more. Thanks > > David Skolnik > Hastings on Hudson, NY > -- Ken Zahringer, RPT Piano Technician MU School of Music 297 Fine Arts 882-1202 cell 489-7529 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080725/87e77160/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC