[CAUT] New Damper holder

[reggaepass at aol.com]

And if the felt WOULD rest on the cardboard (or whatever material your present damper rack is made from), clip a clothespin onto the damper wire a safe distance below the felt so it rides safely above.

Alan Eder


-----Original Message-----
From: Fred Sturm <fssturm at unm.edu>
To: caut <caut at ptg.org>
Sent: Sat, 9 Jun 2007 12:50 pm
Subject: Re: [CAUT] New Damper holder



I've mostly stopped using the ones I made over the years, and reverted to a
corrugated box (top flaps removed, if present). Wires fit in corrugations
pretty tightly. Light weight, disposable, always have one around. Never had
a spill mishap. Very rarely does a felt rest on the narrow bit of cardboard.
Regards,
Fred Sturm
University of New Mexico




________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20070609/4d53361e/attachment.html