Good tip! Jim Busby BYU ________________________________ From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of reggaepass at aol.com Sent: Saturday, June 09, 2007 2:28 PM To: caut at ptg.org Subject: Re: [CAUT] New Damper holder And if the felt WOULD rest on the cardboard (or whatever material your present damper rack is made from), clip a clothespin onto the damper wire a safe distance below the felt so it rides safely above. Alan Eder -----Original Message----- From: Fred Sturm To: caut <caut at ptg.org> Sent: Sat, 9 Jun 2007 12:50 pm Subject: Re: [CAUT] New Damper holder I've mostly stopped using the ones I made over the years, and reverted to a corrugated box (top flaps removed, if present). Wires fit in corrugations pretty tightly. Light weight, disposable, always have one around. Never had a spill mishap. Very rarely does a felt rest on the narrow bit of cardboard. Regards, Fred Sturm University of New Mexico ________________________________ size=2 width="100%" align=center> AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com <http://www.aol.com?ncid=AOLAOF00020000000437> . -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070611/2cc8b68b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC