David I did write it wrong. I'm not glue sizing. I'm "steam" sizing. I steam the bushings, then put in the cauls. Sorry for the confusion. Wim Quoting David Skolnik <davidskolnik at optonline.net>: > Wim - > Am I misreading this? You want to glue-size the key bushings? I > could see maybe non-glue sizing, with just final cauls. I'd be > concerned with stiffening the cloth and the ensuing noise. My > thought. > > David Skolnik > > > At 10:25 AM 10/19/2006, you wrote: > >To remove front and balance rail bushings I use an iron and cloth > and > >steam them out. This morning I started doing this on a front set, > >which I had replaced several years ago, but I noticed that they > >weren't all that worn out. So instead of removing the felt, I glue > >sized them with the final cauls. > > > >Have any of you done this? Results? Are there reasons I shouldn't > do > >this? Certainly saved a lot of time, not to mention bushing cloth > > > >Wim > >Willem Blees, RPT > >Piano Tuner/Technician > >School of Music > >University of Alabama > >Tuscaloosa, AL USA > > Willem Blees, RPT Piano Tuner/Technician School of Music University of Alabama Tuscaloosa, AL USA
This PTG archive page provided courtesy of Moy Piano Service, LLC