Wim - Am I misreading this? You want to glue-size the key bushings? I could see maybe non-glue sizing, with just final cauls. I'd be concerned with stiffening the cloth and the ensuing noise. My thought. David Skolnik At 10:25 AM 10/19/2006, you wrote: >To remove front and balance rail bushings I use an iron and cloth and >steam them out. This morning I started doing this on a front set, >which I had replaced several years ago, but I noticed that they >weren't all that worn out. So instead of removing the felt, I glue >sized them with the final cauls. > >Have any of you done this? Results? Are there reasons I shouldn't do >this? Certainly saved a lot of time, not to mention bushing cloth > >Wim >Willem Blees, RPT >Piano Tuner/Technician >School of Music >University of Alabama >Tuscaloosa, AL USA
This PTG archive page provided courtesy of Moy Piano Service, LLC