Jeff, I took a look. When using the Fujan do you ever have a problem clearing struts, etc? Do you skin your knuckles on the tuning pins? :-) I have a tip extension for clearance that I have to use occasionally, but don't care for it much. Long ago I changed to a 15 degree head with my ol' Hale lever, to get more of the clearance I wanted. Barbara Richmond ----- Original Message ----- From: "Jeff Stickney" <jpstickney@montanadsl.net> To: "College and University Technicians" <caut@ptg.org> Sent: Sunday, January 22, 2006 1:46 PM Subject: Re: [CAUT] Differences? > > The point being that with the added leverage the amount of effort is much > less with the longer hammer. You can check it out at the website: > http://www.fujanproducts.com/. It took me a little while to get used to > it, and being short (5'4"), the length stretches me out a bit more than I > would like. I have requested a tube which would create a hammer 12" long > so I can retain some leverage advantage but have less of a stretch. > > > Jeff Stickney >
This PTG archive page provided courtesy of Moy Piano Service, LLC