S & S Underlevers

[Thomas D. Seay, III]

>Avery,
>	I'd just add to Allen's advice the suggestion you might want to
>retrofit screws to attach the flanges, to prevent them popping out in
>future. Wouldn't bother if they feel reasonably secure, but if they are
>popping off very easily, it might be wise. Takes very little time, with
>tray off and a drill press available. Just centerpunch each flange,
>drill a pilot hole through into the tray (depth and width appropriate to
>whatever screw size you select), then drill a second time with depth
>stop, matching the screw shoulder (wider than threads), to depth of
>flange. With wits together and focused mind, takes maybe 1/2 hour.

Wits together AND focused mind? That's WAY too much to hope for, in my case.

Tom


Tom Seay
School of Music
The University of Texas at Austin
mailto:t.seay@mail.utexas.edu