Balance Rail Bushings

[David and Jean Weiss]

Balance Rail BushingsDo you like the Bushmaster system?  How do you think it compares with the Spurlock 2 caul method?

David Weiss
  ----- Original Message ----- 
  From: Jon Page 
  To: pianotech at ptg.org 
  Sent: Thursday, January 03, 2008 12:19 AM
  Subject: Balance Rail Bushings


    What do you use to get such a good, clean cut at the
    top when you're finished? Razor blade or what?


  A razor blade cut through the veneer and cloth against the brass caul.


  For the bushing on the left, that was a Bushmaster install. I cut from the
  center out with a razor blade once the cauls are removed and then sand
  the buttons with a palm sander and 180 grit paper.
-- 

  Regards,

  Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080104/ed64f2ca/attachment.html