On Sep 3, 2012, at 12:39 PM, Dean May <deanmay at pianorebuilders.com> wrote: > Playing the setup CD all the way through gives zero net change, i.e., all parameters are set back to default. You are supposed to use it to play specific tracks to adjust a parameter one way or the other, but the final track of each parameter is to choose default, therefore when you play it from beginning to end it sets everything to default. > Yes, but the iQ system setup instructions are very clear that the Silent Drive setup CD must be run through first, before using any of the iQ calibration functions such as manual learn. Why this time-consuming extra step is necessary is a mystery. The defaults could easily be set at the factory. --Cy-- Cy Shuster, RPT Albuquerque, NM www.shusterpiano.com www.facebook.com/shusterpiano -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120904/0c452c55/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC