[pianotech] SnS M

[tnrwim at aol.com]

That's what I thought. Again, why would you want to replace it? 

Wim


 



-----Original Message-----
From: lim hock seng <limhseng at gmail.com>
To: pianotech <pianotech at ptg.org>
Sent: Tue, May 22, 2012 4:57 pm
Subject: Re: [pianotech] SnS M


Thanks Wim,
Here is the pic for the plastic cord.
On May 23, 2012 10:17 AM, <tnrwim at aol.com> wrote:

Lim
 
Unless these parts are broken or eaten, there should be no reason to replace them. 

1. balance punchings with wood base-when should I replace or refelt ?   If the felt is gone, then it would be easier to buy new ones from Steinway. Then you will need to level the keys. 
2. Plastic cord for repetion spring-replace?  Where is there plastic in the repetition spring?
3. whippen jack top-replace? You can reburnish the top of the jack if that will help with repetition. 
 
Wim


 



-----Original Message-----
From: lim hock seng <limhseng at gmail.com>
To: pianotech <pianotech at ptg.org>
Sent: Tue, May 22, 2012 3:29 pm
Subject: [pianotech] SnS M


Dear list,
I am servicing a M model and I need an answer on these parts.
1.balance punchings with wood base-when should I replace or refelt ?
2. Plastic cord for repetion spring-replace?
3.whippen jack top-replace?
Thanks.
Lim




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120522/9b6e93ba/attachment.htm>