Carlos: Are you thinking of the liquid silicone that used to be sold by Wurlitzer? dp ______________________ David M. Porritt dmporritt at gmail.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Carlos Ralon Sent: Friday, March 30, 2012 5:02 PM To: pianotech at ptg.org Subject: Re: [pianotech] teflon Is the Liquid Teflon we used to get from Wurlitzer still available, if so... where? We used it in mixture with Naptha as CPL for many years? Carlos Ralon, RPT -----Original Message----- From: atrav27 at att.net [mailto:atrav27 at att.net] Sent: Friday, March 30, 2012 12:12 PM To: pianotech at ptg.org Subject: Re: [pianotech] teflon ----- Original Message ----- From: Heritage Pianos A local technician has recently made claims to the contrary and warned other members of the local PTG to use Teflon. =============== Only my opinion here, so completely unofficial. ;o) If Teflon is bad, I'm in trouble. I use it for where grease would be too thick, and where oil would be too thin, where I would prefer something 'dry' like places you'd use graphite. IMO it's good for something that is not going to be touched again in a very long time, some place where I think oil would evaporate eventually, and I use it for anti-corrosion with strings and such. I use DuPont Teflon ChainSaver. It does have solvents, so I usually spray it on a q-tip or paper towel first, then wipe. It is very slippery when dry, but no oily or greasy feel, more like something very polished. I like the ChainSaver because it has molybdenum too, so that helps keep things slippery for a long time (like I wrote, for things that may never be touched again for years or decades). So, I use it primarily for the rail key pins, for lube and I see lots of corrosion consistently in the rail pins (I'm in humid Florida), and as a wipe on the strings for anti corrosion. It does seem to provide a real Teflon coating, so good for anti-dust too, once again it's nice to have a lube that is 'dry' so you don't get dust and dirt sticking to it. http://www.walmart.com/ip/DuPont-Teflon-Chain-Saver-11-oz/16672659 I don't use it for anti-corrosion at the tuning pins because it REALLY is very thin and slippery when first applied, so I can imagine creating a loose tuning pin as a result. It dries in about a minute. Doesn't feel waxy to me, but they say once dry you end up with a wax-moly-Teflon coating. -Aron- PS, for grease, especially for brass (castors and pedals), I prefer 'SuperLube' synthetic grease. Doesn't seem to damage/soften wood like petroleum greases, it'll make leather soft but doesn't seem to damage it. So for the various combinations of high clearance pedal parts that combine brass to wood to leather, it works a treat, and lasts. http://www.acehardware.com/product/index.jsp?productId=3506761
This PTG archive page provided courtesy of Moy Piano Service, LLC