Or, as Joe said get a better camera, or use macro if it is on your camera. I usually look at the picture to make sure it is ok, before I send it. John Ross Windsor, Nova Scotia On 11-07-2012, at 4:49 PM, Tom Gorley wrote: > Patrick, You got closer to the object than your camera's ability to focus. Back off about 6 inches. > > ---Tom > > On Jul 11, 2012, at 12:34 PM, Joseph Garrett wrote: > >> Patrick, >> I have lots of used square grand parts. If I don't have an exact >> replacement, I can either modify some existing or I can make new ones for >> you. I'm suprised you didn't know that. <G> What/who is the manufacturer? >> You need to get a better camera,bub.<G> All you need to do is send me a >> good sample and we can go from there. K? >> Regards, >> Joe >> >> >>> [Original Message] >>> From: <pianotech-request at ptg.org> >>> To: <pianotech at ptg.org> >>> Date: 7/11/2012 12:29:12 PM >>> Subject: pianotech Digest, Vol 45, Issue 15 >>> >>> Send pianotech mailing list submissions to >>> pianotech at ptg.org >>> >>> To subscribe or unsubscribe via the World Wide Web, visit >>> https://www.moypiano.com/resources/#archives >>> or, via email, send a message with subject or body 'help' to >>> pianotech-request at ptg.org >>> >>> You can reach the person managing the list at >>> pianotech-owner at ptg.org >>> >>> When replying, please edit your Subject line so it is more specific >>> than "Re: Contents of pianotech digest..." >>> >>> >>> Today's Topics: >>> >>> 1. Square Grand Flanges (Patrick C. Poulson) >>> >>> >>> ---------------------------------------------------------------------- >>> >>> Message: 1 >>> Date: Wed, 11 Jul 2012 12:23:39 -0700 >>> From: "Patrick C. Poulson" <pcpoulson at sbcglobal.net> >>> To: <pianotech at ptg.org> >>> Subject: [pianotech] Square Grand Flanges >>> Message-ID: <EDDFE0028CC44879A7B012E8704F594E at PatrickPC> >>> Content-Type: text/plain; charset="iso-8859-1" >>> >>> Hi everyone: I am hoping to find someone who has some square grand >> flanges sitting around that they could part with. I have attached pictures >> of the flange in question. The flange is 1 3/4" long and 5/8" wide. The >> flanges on this grand are very fragile. >>> Alternately, is there any currently made part that can be adapted for use >> in a square grand? >>> Thanks for your help, >>> Patrick C. Poulson >>> Registered Piano Technician >>> 530-265-1983 >>> -------------- next part -------------- >>> An HTML attachment was scrubbed... >>> URL: >> <https://www.moypiano.com/ptg/pianotech.php/attachments/20120711/5a1a5875/attac >> hment.htm> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: Square Grand Flange (75).JPG >>> Type: image/jpeg >>> Size: 157486 bytes >>> Desc: not available >>> URL: >> <https://www.moypiano.com/ptg/pianotech.php/attachments/20120711/5a1a5875/attac >> hment.jpeg> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: Square Grand Flange (76).JPG >>> Type: image/jpeg >>> Size: 161061 bytes >>> Desc: not available >>> URL: >> <https://www.moypiano.com/ptg/pianotech.php/attachments/20120711/5a1a5875/attac >> hment-0001.jpeg> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> pianotech mailing list >>> pianotech at ptg.org >>> https://www.moypiano.com/resources/#archives >>> >>> >>> End of pianotech Digest, Vol 45, Issue 15 >>> ***************************************** >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120711/f9c99b6b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC