I called WNG first, but it has been several days with no response, so I am looking for field feedback. Ed Foote RPT http://www.piano-tuners.org/edfoote/index.html -----Original Message----- From: ed440 <ed440 at mindspring.com> To: pianotech <pianotech at ptg.org> Sent: Fri, Jan 20, 2012 3:23 am Subject: Re: [pianotech] WNG jack don't come back no more, no more, no more..... Mason & Hamlin have considerable experience using these parts! Why don't you call WNG? They are highly invested in these parts, and will work with you to resolve the problem. Ed Sutton -----Original Message----- >From: Ed Foote <a440a at aol.com> >Sent: Jan 18, 2012 6:12 PM >To: pianotech at ptg.org >Subject: [pianotech] WNG jack don't come back no more, no more, no more..... > >Greetings, > Have finally found a rebuild that can use the new space age WNG composite parts. However, the jack will NOT return under the knuckle. (Steinway B). All the geometry looks good, and I have put more spring in than is comfortable to play, raised the rep lever until there is a noticeable gap between the height of the jack, and when I pull the jack out from under, and let it go, it will not return. > This is a problem I noticed on a lot of the Baldwin Renner actions years ago. Has anybody with WNG experience dealt with this before? >Thanks, > > >Ed Foote RPT >http://www.piano-tuners.org/edfoote/index.html > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120120/cdf3d477/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC