I second that. They are always there to help and to correct any problems you may encounter. Good people. Al - High Point, NC On Jan 20, 2012, at 9:10 AM, ed440 at mindspring.com wrote: > Mason & Hamlin have considerable experience using these parts! > Why don't you call WNG? > They are highly invested in these parts, and will work with you to resolve the problem. > Ed Sutton > > -----Original Message----- >> From: Ed Foote <a440a at aol.com> >> Sent: Jan 18, 2012 6:12 PM >> To: pianotech at ptg.org >> Subject: [pianotech] WNG jack don't come back no more, no more, no more..... >> >> Greetings, >> Have finally found a rebuild that can use the new space age WNG composite parts. However, the jack will NOT return under the knuckle. (Steinway B). All the geometry looks good, and I have put more spring in than is comfortable to play, raised the rep lever until there is a noticeable gap between the height of the jack, and when I pull the jack out from under, and let it go, it will not return. >> This is a problem I noticed on a lot of the Baldwin Renner actions years ago. Has anybody with WNG experience dealt with this before? >> Thanks, >> >> >> Ed Foote RPT >> http://www.piano-tuners.org/edfoote/index.html >> >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120120/989f7ee6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC