A good way to clamp them is with cable ties left over from Dampp Chaser installations. Very secure and no cost. Here's a few photos. David Weiss -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Saturday, February 04, 2012 3:30 PM To: pianotech at ptg.org Subject: Re: [pianotech] re-gluing loose hammer felt On 2/4/2012 1:47 PM, Tom Gorley wrote: > About 6 months ago a tuner put us on to clamps that work perfectly for > this job. I wish I could remember who, so I can give him credit. > Here is the website of the Garrett Wade Company and the correct page. > > http://www.garrettwade.com/ratchet-lock-spring-clamps/p/05R04.01/ Sorry, I don't remember who it was either but as long as we're in the Garrett Wade catalog looking at clamps, at $6 each for ten, these are the best F clamp bargain there is. Not much good for hammer felt, but I have 20 of them on a new vertically laminated bridge root in the shop and I really like them. http://www.garrettwade.com/inexpensive-hd-12-fast-acting-clamps/p/05R08.01/ Ron N -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG-20111024-00047.jpg Type: image/jpeg Size: 23091 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120204/fa66b4fb/attachment-0002.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG-20111024-00049.jpg Type: image/jpeg Size: 24740 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120204/fa66b4fb/attachment-0003.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC