Nitro will adhere to the primer, but the primer must be sanded well. Since the nitro can't re-solvate a catalyzed primer, you need a good mechanical bond. It's hard to get a good sanding in the recesses. Al - High Point, NC On Aug 21, 2012, at 8:37 AM, Jim Ialeggio wrote: I think the culprit, at least how I was doing it, was high build auto body primers followed by a nitrocellulose product. -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120821/753ca254/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC