[pianotech] Broken Drill Bit in Bridge

[Encore Pianos]

What model is your Black and Decker?  

Will

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Ron Nossaman
Sent: Sunday, August 12, 2012 5:22 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Broken Drill Bit in Bridge

On 8/12/2012 4:02 PM, Encore Pianos wrote:
> What's the drill speed on your Black & Decker (whatever, rest of it 
> hidden by tape)?

Ranges are 12,000 24000 and 30000. I set it on - what worked best by trying
it.


>Is that a depth stop adjustment centered at the top?

Not centered, but yes, it is, set to somewhat deeper than the pin will 
be driven so I don't have to file the things. It stops on the top of one 
of the guide rods.

This was also in the Journal. Don't ANY of you guys read your Journals?

Ron N