BRILLIANT!! Somebody nominate this man for a Nobel Prize. On Aug 10, 2012, at 11:57 AM, Joe Goss wrote: > Hi, > Sometimes I think and at other times I do not. > > The Difficulty may be that the once tight rivet that is the 'hinge' has worn through the years and allows the flat iron to flop like a dead fish. > Two taps with a light hammer against a solid surface would tighten the hinge and allow one to position the hinge without having to hold both ends at the same time. > It would also give the player more control of the fall board when closing the board. > Joe Goss BSMusEd MMusEd RPT > imatunr at srvinet.com > www.mothergoosetools.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120811/2ab89e16/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC