Wim, it wasn't tubbiness. It was thubbyness. LOL Avery On Fri, Aug 10, 2012 at 12:50 PM, <tnrwim at aol.com> wrote: > You're both wrong. The tubbyness came from the hammer flanges with broken > loops > > Wim > > -----Original Message----- > From: Terry Farrell <mfarrel2 at tampabay.rr.com> > To: pianotech <pianotech at ptg.org> > Sent: Fri, Aug 10, 2012 5:17 am > Subject: [pianotech] Thubby Chipboard, was: Flagpoling > > Okay, so the little Yamy had a "thubby" sound. What leads you to > conclude it was because of the chipboard (more than likely MDF) cabinet > core? Personally, I'm quite sure any "thubby" sounds were a direct result > of the plastic keytops - anyone knows plastic will never sound like ivory. > > Terry Farrell > > On Aug 10, 2012, at 9:20 AM, Euphonious Thumpe wrote: > > And please allow me to add, briefly, that I had a HORRIBLE experience > with flagpoling pins in a Georgia-built Yamaha P-22 upright once that was > so bad it made tuning nearly impossible. Caused by extremely tight tuning > pins and perhaps the wrong type of steel, in combo. (It also had a > chipboard cabinet core, which made it sound "thubby". ) > > Thumpe > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120810/19ff541b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC