You're both wrong. The tubbyness came from the hammer flanges with broken loops Wim -----Original Message----- From: Terry Farrell <mfarrel2 at tampabay.rr.com> To: pianotech <pianotech at ptg.org> Sent: Fri, Aug 10, 2012 5:17 am Subject: [pianotech] Thubby Chipboard, was: Flagpoling Okay, so the little Yamy had a "thubby" sound. What leads you to conclude it was because of the chipboard (more than likely MDF) cabinet core? Personally, I'm quite sure any "thubby" sounds were a direct result of the plastic keytops - anyone knows plastic will never sound like ivory. Terry Farrell On Aug 10, 2012, at 9:20 AM, Euphonious Thumpe wrote: And please allow me to add, briefly, that I had a HORRIBLE experience with flagpoling pins in a Georgia-built Yamaha P-22 upright once that was so bad it made tuning nearly impossible. Caused by extremely tight tuning pins and perhaps the wrong type of steel, in combo. (It also had a chipboard cabinet core, which made it sound "thubby". ) Thumpe -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120810/434e0e25/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC