Susan, Too late, in some cases. ;-) On 10/08/2012, Susan Kline <skline at peak.org> wrote: > Then there is that kind of grand where you can't figure out HOW to get > in until you twig that there are struts on the *edges* of the fallboard, > with about four screws holding each into a shallow groove. That one gave > me a few interesting minutes. > > Susan Kline > > P.S. Changed the subject line from "idots" to "idiots" --- not wanting > us all to look like same ... >> >> I'd rather remove an Acrosonic fall board than those grand actions >> with 50 screws holding the fall board and action in place. Screws on >> the fall board pivot pins, screws for the top section of cheek block, >> screws for the lower section of cheek block, and finally! screws for >> the action guides. >> >> Maybe 50 is a bit exaggerated..... >> >> -- >> John Formsma, RPT >> Blue Mountain, MS >> > -- Bruce Browning The Piano Tuner
This PTG archive page provided courtesy of Moy Piano Service, LLC