Heat will thin epoxy, so that it penetrates. John Ross Windsor, Nova Scotia On 29-11-2011, at 5:49 AM, Joe Wiencek wrote: > Hello list, > I've been reading with great interest about the recent articles in the Journal about treating bridges with thin epoxy. I am trying to imagine an epoxy that's thin enough to be put on the bridge cap without it adding material. Is there a very thin viscosity epoxy on the market that's being used for this, or the possibility of thinning epoxy with lacquer thinner or some other solvent? > Thanks for any input. > > Joe Wiencek -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111129/98010bd5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC