[pianotech] SnS 45 upright

[Ryan Sowers]

Lubricate the upper bearing surfaces with protek. Don't overshoot pitch very
much if any. Use very firm test blows.

Ryan Sowers

On Thu, Jun 30, 2011 at 9:47 PM, <tnrwim at aol.com> wrote:

> Lim
>
>  S&S 45" uprights are notorious for taking a lot of patience and a lot of
> work to get it in tune. But the good news is that once you've got it there,
> it will pretty much stay there, especially in a very stable climate
> like Singapore.
>
> Wim Blees RPT
> Honolulu, Hawaii
>
>  -----Original Message-----
> From: limhseng <limhseng at gmail.com>
> To: pianotech <pianotech at ptg.org>
> Sent: Thu, Jun 30, 2011 5:52 pm
> Subject: [pianotech] SnS 45 upright
>
> Hi,
> I have difficulties tuning the last 2 octaves(high treble) of this model.
> Octaves and unisons were difficult to set and stay stable. Pins are good and the
> piano condition is still very good. Any comments appreciated.
> Lim
> Sent from my BlackBerry Wireless Handheld
> Powered by Gee! from StarHub
>
>


-- 
Ryan Sowers, RPT
Puget Sound Chapter
Olympia, WA
www.pianova.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110630/caaabf67/attachment.htm>