[pianotech] hex size

[paul bruesch]

To answer the question:
I carry a .211" allen wrench for that purpose... I reckon that it's probably
5.5mm, and I should have 7/32"

Paul  Bruesch
Stillwater, MN

On Thu, Aug 18, 2011 at 6:36 PM, Leslie Bartlett
<l-bartlett at sbcglobal.net>wrote:

> ** ** ** **
>
> Well my little vise grip kept coming off.  I can take a Dremmel tool and
> put a couple flat spots on it so a vise grip could grip………………………****
>
> ** **
>  ------------------------------
>
> *From:* pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] *On
> Behalf Of *algiers_piano at bellsouth.net
> *Sent:* Thursday, August 18, 2011 5:01 PM
> *To:* **pianotech at ptg.org**
> *Cc:* <**pianotech at ptg.org**>
> *Subject:* Re: [pianotech] hex size****
>
> ** **
>
> I find it's also the size of the handle end of my regulating screwdriver.
>
> ---Dave Doremus ****
>
>   ****New Orleans********
>
>
> On Aug 18, 2011, at 4:37 PM, "David Stocker" <firtreepiano at hotmail.com>
> wrote:****
>
> ********
>
> I find it is usually the size of a vise-grip around the outside of the
> screw head. ****
>
>  ****
>
> David Stocker, RPT
> ****Tumwater**, **WA********
>
>  ****
>
> ** **
>
>  ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1392 / Virus Database: 1520/3842 - Release Date: 08/18/11***
> *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110818/be0c243c/attachment.htm>