Well my little vise grip kept coming off. I can take a Dremmel tool and put a couple flat spots on it so a vise grip could grip......... _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of algiers_piano at bellsouth.net Sent: Thursday, August 18, 2011 5:01 PM To: pianotech at ptg.org Cc: <pianotech at ptg.org> Subject: Re: [pianotech] hex size I find it's also the size of the handle end of my regulating screwdriver. ---Dave Doremus New Orleans On Aug 18, 2011, at 4:37 PM, "David Stocker" <firtreepiano at hotmail.com> wrote: I find it is usually the size of a vise-grip around the outside of the screw head. David Stocker, RPT Tumwater, WA _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1392 / Virus Database: 1520/3842 - Release Date: 08/18/11 -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110818/f5996e6b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC