They are, if you have the right tool. But without a Robertson tip, you're SOL. Wim If my memory serves me right the robertson head was invented by a canadian. uch easier to work with than a philips IMO oe Goss BSMusEd MMusEd RPT -----Original Message----- From: Joe Goss <imatunr at srvinet.com> To: pianotech <pianotech at ptg.org> Sent: Wed, Aug 17, 2011 4:59 pm Subject: Re: [pianotech] Grander than grand If my memory serves me right the robertson head was invented by a canadian. uch easier to work with than a philips IMO oe Goss BSMusEd MMusEd RPT matunr at srvinet.com ww.mothergoosetools.com ---- Original Message ----- rom: "Ron Nossaman" <rnossaman at cox.net> o: <pianotech at ptg.org> ent: Wednesday, August 17, 2011 8:47 PM ubject: Re: [pianotech] Grander than grand On 8/17/2011 8:56 PM, Mike Kurta wrote: > Ron, I've seen those Robertsons on Canadian pianos. > Mike Kurta Hi Mike, Sure, I'd expect that. But Grands aren't Canadian, are they? Of course the screws might not be original either. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110818/6bb3dae4/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC