Marshall, Make the price right. Say $30,000.00 <g> Joe Goss BSMusEd MMusEd RPT imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: <ed440 at mindspring.com> To: <pianotech at ptg.org> Sent: Tuesday, August 09, 2011 9:31 AM Subject: Re: [pianotech] disc system > Marshall, > You would do well to contact the PianoDisc and QRS companies and get their > advice. > While it can be done, you will be loading an old spinet with even more > stuff. How will you reach the hammer rail to tighten screws? The power > source will generate heat inside the piano. It will probably rattle and > malfunction. Player systems are hard on old pianos. > Ed Sutton > > > > -----Original Message----- >>From: Marshall Gisondi <pianotune05 at hotmail.com> >>Sent: Aug 8, 2011 10:19 PM >>To: pianotech at ptg.org >>Subject: [pianotech] disc system >> >> >>Hi Jim, >>thank you for the advice. This may be a new avenue for me to explore >>working with disc. systems >>Marshall >> >>Marshall Gisondi Piano Technician >>Marshall's Piano Service >>pianotune05 at hotmail.com >>215-510-9400 >>www.phillytuner.com >>Graduate of The School of Piano Technology for the Blind >>www.pianotuningschool.org Vancouver, WA >> >> >> >> > >
This PTG archive page provided courtesy of Moy Piano Service, LLC