Good tip Ed. Thanks Dale S. Erwin www.Erwinspiano.com Sitka Soundboard Sales Ronsen Piano hammers 209-577-8397 -----Original Message----- From: Ed Foote <a440a at aol.com> To: pianotech at ptg.org Sent: Thu, Apr 21, 2011 4:51 pm Subject: Re: [pianotech] Damper Felt Inre uneven trichord felt, Dale writes: >> I think trichord felt from anywhere must come that way. Tokiwa ...the same deal. I cut the slot deeper and add 1 to 2 pieces of kite string to get them to work. If that fails, I use the trusty damper smushing plier on the fat leg. I have made them work by pulling the smaller side down with a long needle inserted lengthwise about 2/3rds of the way up the leg then trimming the bottom to make both legs even. But I shouldn't have to. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110421/5494beb2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC