That's odd, on my email from the list it looks fine. I'll resend it as plain text... Thanks, Patrick. ----------- Greetings, My client wanted to replace the hardware on his rusted piano (a 2004 Kohler & Campbell, KGC650). He figured he could save a bit by doing this part himself. In the process of removing the lock assembly for replacement, the finish chipped. He said it felt like the finish was glued to the hardware. He didn’t apply a tool in this area, it came off when the hardware came off (this is the new part in the photo). How fixable is this? I don’t have any experience refinishing, so any advice would be appreciated. Regards, Rob McCall McCall Piano Service, LLC www.mccallpiano.com Murrieta, CA 951-698-1875 -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1335.jpg Type: image/jpg Size: 95238 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110420/e21edd9e/attachment-0001.jpg> -------------- next part -------------- On Apr 20, 2011, at 22:46 , Patrick C. Poulson wrote: > Rob: the text of your message was superimposed on the picture. > Patrick
This PTG archive page provided courtesy of Moy Piano Service, LLC