[pianotech] Grand damper wire bending

[Jim Moy]

On Tue, Sep 28, 2010 at 10:19 PM, Ron Nossaman <rnossaman at cox.net> wrote:
> On 9/26/2010 7:19 PM, Tom Driscoll wrote:
>> Mine was purchased
>> many years ago so the version now available may or may not be satisfactory.
>
> Likewise, though it's a simple enough action that I'd expect the current run to be similar. A worthy investment.

I got a "new" one a few years ago that has a rivet instead of a pin
joint. It doesn't feel as solid as my other plier type tools with the
big pins, but it seems to work well enough.

Jim