[pianotech] Spinets

Paul T Williams pwilliams4 at unlnotes.unl.edu
Sun Sep 26 17:30:17 MDT 2010


Mr Grace is a true blessing to the blind section of this wonderful 
industry we call "work". We can all strive to be as good as him.  I've 
seen a set of hammers replaced on an upright done as well as anyone 
sighted in the business.  Don't know how he does it, but, yes he does. 
Great job, John!

Yes, the best musicians can get music out of anything, and only we techs 
are able to get the best piano out of the piece of furnature we have to 
work with. Whatever the piano we come into contact with, we should strive 
to make it better!  I know; some just can't be helped, and even some don't 
sound any better afterward (to us) than when we came to visit.  but we 
give it our best shot we can and certainly, it comes out even a bit better 
than when we arrived. Don't you think? We're supposed to....

Paul




From:
"Piano Boutique" <pianoboutique at comcast.net>
To:
<pianotech at ptg.org>
Date:
09/26/2010 06:09 PM
Subject:
Re: [pianotech] Spinets



Ryan,
 
I have a few things to add to this discussion.   First of all: if the only 
people who played expensive pianos were aloud to play,the world would have 
missed out on a lot of good musicians.
 
Second:  I sure have made a lot of money off Acrosonics.
 
Finally,  John Grace and I came from the same school and I love him 
dearly.  He will be one of the first to say like Professor Robert Sherman 
said, he can pull music out of any instrument.
 
Of coarse, you all know what I am talking about, so go out there and give 
every customer your best.
 
 
William
 
 
 
----- Original Message ----- 
From: Ryan Sowers 
To: pianotech at ptg.org 
Sent: Sunday, September 26, 2010 6:55 PM
Subject: Re: [pianotech] Spinets

Wim lives in Hawaii which is an extreme climate for pianos. Rust, bugs, 
and such take their tole in a much more accelerated manner in a situation 
like that.

In my climate (Pacific NW) we see many older pianos that have virtually no 
rust, with felts and parts in good working condition. 

Comparing spinets to large pianos is a bit like comparing a ukulele to a 
big body guitar. It's not a fair comparison! A good ukulele can be a lot 
of fun and there is much music to be made on them.  A good Irish tin 
whistle is the same way! 

I have had pianists who could play quite well buy spinets from our shop. I 
think some of the technicians who criticize spinets maybe don't even play 
the piano. 

A nicely tuned, voiced, and regulated spinet is a rare beast indeed. We 
are one of the very few shops in the Puget Sound who have them. I have 
made them a specialty. When I was starting out I worked in a little shop 
downtown that was owned by a blind tech, John Grace. John (an excellent 
musician, by the way!) was never intimidated by spinet pianos and he got a 
kick out of them. That experience working with him, helped open my mind 
about these little beasties. 

So for those who hate them, go ahead and bash spinets, and pat yourself on 
the back about how you are above such lowly pianos. It just means more 
work for me!

Ryan Sowers, RPT
Puget Sound Chapter
Olympia, WA
www.pianova.net

On Sun, Sep 26, 2010 at 9:27 AM, Bill Fritz <pianofritz50 at aol.com> wrote:
Joe, you said in reply to Wim's comments:
 
> Wim,
> I totally disagree.<G>
> Joe
> 
> Joe Garrett, R.P.T. (Oregon)
 
Could you please explain the basis of your disagreement? 
 
Wim makes a compelling argument.  Inquiring minds want to know...   Bill 
Fritz, StL/PTG
 
From:
tnrwim at aol.com
To:
joegarrett at earthlink.net; pianotech at ptg.org
Subject:
Re: [pianotech] Spinets
Date:
Sat, 25 Sep 2010 22:47:21 -0400 (EDT)
One of the main problems with spinets is not that they can't be made 
better. It's that for the most part, (there are exceptions), the people 
who own them, got them for free, or for very little money, and don't want 
to spend the money it takes to make them better. Not only that, but often 
there are so many things wrong with them, it's hard to know where to 
start. Here in Hawaii, most spinets are at least 30 - 40 years old, or 
older, and they have rusty stings, worn out actions, crusty dampers, 
pedals that don't work, and cases that look like hell. Where do you start? 

 
It's not that I don't want to make them better, even if a customers is 
willing to spend some money to make it better. But sometimes it's just not 
worth it to make even the most basic of repairs. 
Wim





-- 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100926/c59469f0/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC