My screwdriver vs:yardstick... 5/8" bit. McMaster-Carr Conrad Hoffsommer > From: mfarrel2 at tampabay.rr.com > To: pianotech at ptg.org > Date: Thu, 28 Oct 2010 09:11:28 -0400 > Subject: Re: [pianotech] Big Wankin' screwdrivers > > Hi Phil - Did you ever see my HUMUNGO screwdriver? I'm pretty sure I > bought it from Schaff or the other place (that went out of business - > bought by Schaff I think). Look in the tool section of their catalog. > I mean it is like three feet long and the blade is a good half-inch > across. Also the shank is square (guessing about 1/2" square), so it > is real easy to put a crescent wrench on it for super turning power. > I've used that screwdriver more than I ever thought I would. > > There is also one available that fits into a tuning tip. I have one of > those also. Using it with you tuning lever gives oodles of turning > torque also. > > Terry Farrell > > On Oct 27, 2010, at 11:55 PM, Phil Bondi wrote: > > > Hi all. > > > > I am in search of some jumbo screwdrivers - the kind that will fit > > plate bolts - both slotted and phillips. > > > > Any ideas? > > > > Thanks. > > > > -Phil > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101028/66af81f0/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: MVC-013F.JPG Type: image/jpeg Size: 67601 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101028/66af81f0/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC