Terry right you are... Tom ----- Original Message ----- From: Terry Farrell To: pianotech at ptg.org Sent: Monday, October 04, 2010 1:56 PM Subject: Re: [pianotech] Question of a Plate Don't mean to step on your toes Tom - I CAN see where a Julius Bauer might come to mind - but definitely not Julius Bauer. No ribs on top of soundboard panel. Plate is not full perimeter in the picture. Below are a couple shots of a Julius Bauer. What an absolutely massive, massive plate! Terry Farrell On Oct 4, 2010, at 5:50 AM, Tom Servinsky wrote: This looks very similar to a Julius Bauer styled plate. Tom Servinsky ----- Original Message ----- From: Ken & Pat Gerler To: pianotech at ptg.org Sent: Monday, October 04, 2010 12:46 AM Subject: [pianotech] Question of a Plate Hello all, Has anyone seen a plate like I have attached and can say what piano it came out of? Thanks in advance, Ken Gerler kenneth.gerler at prodigy.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101004/27a827b1/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 72130 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101004/27a827b1/attachment-0002.jpeg> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 70712 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101004/27a827b1/attachment-0003.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC