Jon, i pulled out one staple and it is vert small (2mm) i don't think they are holding the keyslip... I Also tried banging out the keyslip with a hammer and it didn't move at all... I beleive it is glued... Rafael H Enviado desde mi iPhone El 19/05/2010, a las 11:32 a.m., Jon Page <jonpage at comcast.net> escribió: > >> No staples and no screws... > > On photos 3 & 4, look at the rectangular indents into the bottom > of the keybed a short distance back from the keyslip, staples. > > In photo 4 there are two staples embedded at the end with two > more spaced along the length. > -- > > Regards, > > Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100519/87b58713/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC